BDP-160_V01.06.bin
60,2 MB (63.192.244 bytes)
DVD.bin
1.00 MB (1,048,576 bytes)
DLdiscidentifier.txt
24 bytes
NOTE:
If the correct files are not copied to the USB memory device, your player will not recognize it as an
update USB memory device and you will not be able to carry out the update.
D. Update the player’s system firmware:
REMARKS:
The update process takes approximately 2 minutes to complete.
Before updating the system firmware, confirm that the disc tray is empty.
When you insert or remove a USB memory device, be sure to turn the main power off.
PROCEDURE:
1.
Connect the USB memory device to the USB port on the player's front panel.
Note: Be sure to connect your USB memory device to the USB port on the player's front
panel. If your USB memory devices are already connected to both the USB ports on the
player's front and rear panels, disconnect the USB memory device on the front and replace
it with the USB memory device which contains the system firmware update files.
2.
Press the "STANDBY/ON" button to switch on the unit.
3.
Press the "HOME MENU" button to display the Home Menu screen.
4.
Select "Initial Setup" and press the "ENTER" button.
5.
Select "Options" and press the "ENTER" button.
6.
Select "Update" and press the "ENTER" button.
7.
Select "USB Storage" and press the "ENTER" button.
The following message "Now the update file is under searching! Please wait …" is
displayed on your TV and "Here an update file has been found! Start update with
version?" is displayed when the player is ready to update.
If your USB memory device is not properly installed or the correct firmware update
files cannot be found on your USB memory device, a message "No valid update file is
found! Please insert the right one …" is displayed. In this case, check the files on your
USB memory device, and then reinsert it correctly into your player.
8.
Press the "ENTER" button to start updating.
Do not unplug the AC power cable during the updating process!
"UPDATE" will be displayed on the front panel display of your player during the update
process.
