43
BDP-09FD
5
6
7
8
5
6
7
8
A
B
C
D
E
F
[7] ATA/ATAPI DEBUG OSD
[
8
] ETHERNET CHECK MODE
Performance data of the DRI
V
E Assy can be confirmed. Refer to the fourth screen, shown below, for the judgments on
degradation of LDs and use them as a guide for replacement of the DRI
V
E Assy.
Replace the DRI
V
E Assy if any of the LDs is judged as
N
G.
To display the first screen, press the [ESC], [DISP], then [3] keys, in that order.
To display the third screen, press the [DIG/A
N
A] key twice.
Note
: To use this mode, a PC that supports LA
N
and RS-232C connection and LA
N
environment are required.
In this mode, the result of communication via the Ethernet connector is displayed.
1. Connect the Blu-ray disc player and the PC via a LA
N
cable and RS-232C cable (Interlink cross cable).
2. Perform the network settings of the PC, as follows:
IP Address
: 192.16
8
.0.200
Subnet Mask
: 255.255.255.0
3. Start up the terminal software* of the PC then perform the port settings,
as shown below. Improper settings will lead to
failure in communication.
* Example of how to access the port settings when Windows is used:
From the Start menu, select All Programs, Accessories, Communications,
then Hyper Terminal Software.
Baud rate
: 115200
Data
:
8
bits
Parity
:
N
one
Stop
:
1
bit
Flow
:
N
one
4. Press the [ESC], [CHP/TIM], then [3] keys, in that order, to send a ping from the player to the PC. “OK” will be displayed on
the terminal software of the PC within 10 seconds if Ethernet communication is properly performed.
If “
N
G” is displayed, improper LA
N
or RS-232C connection settings, connection error,
or failure in the player may be suspected.
The power-on duration and error logs that the writer manages are displayed.
1
Accumulated power-on duration
2
LD read power-on duration for the BD
3
LD read power-on duration for the D
V
D.
4
LD read power-on duration for the CD.
5
Serial
N
o. of the PU
1
2
3
4
5
• 3rd screen (ATA/ATAPI DEBUG OSD-Drive maintenance data)
It is indicated to what extent the LDs (for BD, D
V
D, and CD) of the drive have degraded. To update the on-screen data,
content and updating conditions, see Table 1 below:
• 4th screen (ATA/ATAPI DEBUG OSD-Jud
g
ment of de
g
radation of LDs)
Table 1: Display content and updatin
g
conditions
TMP
BD
Judgment of degradation of the LD for BD.
N
G with a rate of 120% or higher
Display Content
Display Item
Judgment of degradation of the LD for D
V
D.
N
G with a rate of 120% or higher
Judgment of degradation of the LD for CD.
N
G with a rate of 120% or higher
Current temperature inside the writer
D
V
D
CD
PC
RS-232C
LA
N
Blu-ray Disc PLAYER
OK or
N
G
OK or
N
G
OK or
N
G
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
Connection diagram of the Interlink cross cable
DSB 9Pin
Female
Female
