- 10 -
En
g
lis
h
Settings and recorded contents are reset to the factory settings.
The remote control CD-R33 is sold separately. For details concerning operations, see the
remote control manual.
1
Start the engine to boot up the system.
The [Select Program Language] screen appears.
NOTES
•
From the second time on, the screen shown will differ depending on the previous conditions.
•
From the second time on, enter the password for the anti-theft function if the password entry
screen appears.
2
Touch the language.
3
Touch .
The [Speaker Mode Settings] screen appears.
4
Touch the speaker modes.
[
Standard Mode
]
4-speaker system with front and rear speakers, or a 6-speaker system with front and
rear speakers and subwoofers.
[
Network Mode
]
3-way system with a high range speaker, middle range speaker and subwoofer (low
range speaker) for reproduction of high, middle and low frequencies (bands).
WARNING
Do not use the unit in Standard Mode when a speaker system for 3-way Network Mode is
connected to the unit. This may cause damage to the speakers.
5
Touch .
The [DAB ANTENNA POWER SETTING] screen appears.
Initial Legal Disclaimer screen appears. Skip to step 7.
6
Touch [Yes] then [OK] to use the DAB aerial power (page 79).
Initial Legal Disclaimer screen appears.
7
Touch [OK].
Remote control
Starting up the unit
Z920DAB
Z820DAB
Z720DAB
Z7210DAB
Z620BT
Z6210BT