Pioneer AVIC-X3 II, Руководство по эксплуатации

Страница: 111 / 164

109
Ch
ap
te
r
8
Cu
st
o
m
isin
g t
h
e A
V
S
ou
rc
e S
et
tin
g
AV
❒
When you set staging other than “ Off ”, the
high pass filter ( HPF ) setting turns “ Off ”.
➲
“Using the high pass filter”
➞
Page 109
Adjusting a position effect
You can select a listener position that you want to
make as the centre of sound effects.
1
Touch “Staging” in the Sound menu.
2
Touch “Position”.
3
Touch the desired position.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Touch “Loudness” in the Sound menu.
2
Touch “On” to turn loudness on.
To turn loudness off, touch “ Off ”.
3
Touch
4
or
6
to select a desired level.
Each time you touch
4
or
6
selects level in
the following order:
Low – Mid – High
Using subwoofer output
This navigation system is equipped with a sub-
woofer output which can be turned on or off.
❒
When the subwoofer output is on, you can
adjust the cut-off frequency, the output level
and the phase of the subwoofer.
1
Touch “Sub Woofer” in the Sound menu.
When Preout (the subwoofer controller set-
ting in Initial menu) is Full , you cannot select
“ Sub Woofer ”.
➲
“Setting the rear output and subwoofer
controller”
➞
Page 113
2
Touch “On” to turn subwoofer output on.
To turn subwoofer output off, touch “ Off ”.
3
Touch “Reverse” or “Normal” to select
the phase of subwoofer output.
4
Touch “+” or “–” to adjust the output
level of the subwoofer.
+6
to –6 is displayed as the level is increased
or decreased.
5
Touch
4
or
6
to select cut-off frequency.
Each time you touch
4
or
6
selects cut-off
frequencies in the following order:
50 – 80 – 125 (Hz)
Only frequencies lower than those in the
selected range are output from the subwoofer.
Using non fading output
When the non fading output setting is on, the
audio signal does not pass through navigation
system’s low pass filter (for the subwoofer), but is
output through the RCA output.
1
Touch “Non Fading” in the Sound menu.
Only when Preout (the subwoofer controller
setting in Initial menu) is Full , you can select
“ Non Fading ”.
➲
“Setting the rear output and subwoofer
controller”
➞
Page 113
2
Touch “On” to turn non fading output on.
To turn non fading output off, touch “ Off ”.
3
Touch “+” or “–” to adjust the output
level of the non fading.
+6
to –6 is displayed as the level is increased
or decreased.
Using the high pass filter
When you do not want low sounds from the sub-
woofer output frequency range to play from the
front or rear speakers, turn the
HPF (high pass
filter) on. Only frequencies higher than those in
the selected range are output from the front or
rear speakers.
1
Touch “HPF” in the Sound menu.
2
Touch “On” to turn high pass filter on.
To turn high pass filter off, touch “ Off ”.
3
Touch 4 or 6 to select cut-off frequency.
Each time you touch 4 or 6 selects cut-off
frequencies in the following order:
50 – 80 – 125 (Hz)
When Preout (the subwoofer controller set-
ting in Initial menu) is Sub. W , the HPF
function is effective for front speakers only.
Audi
o Adj
u
st
me
nt
s
MAN-AVIC-X3-EN.book Page 109 Wednesday, June 6, 2007 10:15 AM