Pioneer AVIC-X1R, Руководство по установке

Страница: 10 / 181

9
Connecting the System
ENG/MASTER 96
<CRD3958A/U> 10
Connecting the power cord (1)
Connect leads of the same
colour to each other.
C a p ( * 1 )
When not using this terminal,
do not remove the cap.
ISO connector
Fuse holder
*1
*2
*4
*3
*5
Yellow (*2)
To terminal always supplied
with power regardless of
ignition switch position.
Red (*4)
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Yellow (*3)
Back-up
(or accessory)
Red (*5)
Accessory
(or back-up)
Black (earth)
To vehicle (metal) body.
Orange/white
To lighting switch terminal.
Note:
In some vehicles, the ISO connector
may be divided into two. In this case,
be sure to connect to both connectors.
Fuse resistor
Fuse resistor
Note:
Depending on the kind of vehicle, the
function of *3 and *5 may be different.
In this case, be sure to connect *2 to *5
and *4 to *3.
Speaker leads
White:
Front left
+
White/black: Front left
≠
Grey: Front right
+
Grey/black: Front right
≠
Green: Rear left
+
or Subwoofer
+
Green/black: Rear left
≠
or Subwoofer
≠
Violet: Rear right
+
or Subwoofer
+
Violet/black: Rear right
≠
or Subwoofer
≠
CRD3958A_U_inst001_031_UK 11/12/04 13:09 Page 10