Pioneer AVIC-D1, Руководство по обслуживанию

Страница: 262 / 276

AVIC-D1/UC
262
1 2 3 4
1 2 3 4
C
D
F
A
B
E
4. Emergency Process
4.1. There are following 7 FLAP-related emergency conditions:
(1) Reversed insertion of a CD
(2) Insertion of an unreadable CD
(3) Half loading of CD
(4) Reversed insertion of a DVD
(5) Insertion of an unreadable DVD
(6) Half loading of DVD
(7) When there is a physical obstruction on sliding track
4.2. FLAP process in emergency conditions
For (1), (2), (4), and (5),
• The same process as normal insertion (LAST position after loading) is executed and then the error message is displayed.
• No automatic ejection.
For (3) and (6),
• The same process as normal insertion (LAST position after loading) is executed.
• Basically, no sliding operation is executed if emergency status is detected before the sliding operation.
• If emergency occurs while sliding in open direction, it slides in close direction by 1 position and then stops sliding.
• If emergency occurs while sliding in close direction, it slides in open direction by 1 position and then stops sliding.
For (7),
• If emergency occurs while sliding in open direction, it slides in close direction by 1 position and then stops sliding.
• If emergency occurs while sliding in close direction, it slides in open direction by 1 position and then stops sliding.
• If sliding waveform change by angle key pressing, etc. does not appear for 500ms due to obstruction, etc., it slides in
the opposite direction by 1 position and stops sliding.
If it does not return to the position to be returned by 1 position in error even after 750ms, it stops at the position.
• If close sense SW does not turn ON for 500ms due to obstruction, etc. during transition to full close, it slides in the open
direction from the current position by 1 position and then stops operating.
• If open sense SW does not turn ON for 500ms due to obstruction, etc. during transition to half or full open, it slides in
the close direction from the current position by 1 position and then stops operating.
4.3. Emergency specification in CD/DVD disc error (above (1) – (6))
• Operation is basically identical to normal discs, and the only special process is error message display.
• No processes such as automatic ejection of CD/DVD in error are executed basically.
• When a disc is inserted once, it can only be ejected by the DISC eject key.
4.4. Emergency display and alarm tone
• In case of a CD/DVD error (including reversed disc), the corresponding error message is displayed so that each error
condition can be recognized.
• An alarm tone is sound to notify sliding disabled conditions when sliding operation becomes disabled.