Pioneer AVIC-5200NEX, Руководство по эксплуатации

Страница: 68 / 92

68
Displaying the “Audio” setting
screen
1 Press the button.
2 Touch , and then
.
Using fader/balance adjustment
1 Display the “ Audio ” setting screen.
 Refer to Displaying the “ Audio ” setting screen on page 68
2 Touch [ Fader/Balance ].
p
Only the balance can be adjusted when “ On ” is selected in
“
Rear Speaker
”. Touch [
Balance
] and skip to step 4.
 Refer to Setting the rear speaker output on page 68.
3 Touch or to adjust the front/rear speaker
balance.
p
Set “ Front ” and “ Rear ” to “ 0 ” when using a dual speaker
system.
4 Touch or to adjust the left/right speaker
balance.
 You can also set the value by dragging the point
on the displayed table.
Switching sound muting/
attenuation
You can automatically mute or attenuate the AV source volume
and the iPhone or smartphone application volume when the
navigation outputs the guidance voice.
The default setting is “
ATT
”.
1 Display the “ Audio ” setting screen.
 Refer to Displaying the “ Audio ” setting screen on page 68
2 Touch [ Mute Level ].
3 Touch the item.
 ATT :
The volume becomes 20 dB lower than the current volume.
 Mute :
The volume becomes 0.
 Off :
The volume does not change.
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of
each source to prevent radical changes in volume when switch-
ing between sources.
p
Settings are based on the FM tuner volume level, which
remains unchanged.
p
This function is not available when the FM tuner is selected
as the AV source.
1 Compare the FM tuner volume level with the
level of the source.
2 Display the “ Audio ” setting screen.

Refer to Displaying the “ Audio ” setting screen on page 68
3 Touch [
Source Level Adjuster
].
4 Touch or to adjust the source volume.
p
If you directly touch the area where the cursor can be moved,
the SLA setting will be changed to the value of the touched
point.
p
“ +4 ” to “ –4 ” is displayed as the source volume is increased
or decreased.
p
The default setting is “ 0 ”.
Setting the rear speaker output
A rear speaker output of this product can be turned on or off.
The default setting is “ On ”.
1 Display the “ Audio ” setting screen.

Refer to Displaying the “ Audio ” setting screen on page 68
2 Touch [ Rear Speaker ] to switch “ On ” or “ Off ”.
p
If “ Off ” is selected, the rear speaker adjustment is not
available in “ Speaker Level ”, “ Time Alignment ” and
“ Crossover ”.
Setting the subwoofer output
This product is equipped with a subwoofer output mechanism,
which can be turned on or off.
The default setting is “ On ”.
1 Display the “ Audio ” setting screen.

Refer to Displaying the “ Audio ” setting screen on page 68
2 Touch [ Subwoofer ] to switch “ On ” or “ Off ”.
p
If “ Off ” is selected, the rear speaker adjustment is not
available in “ Speaker Level ”, “ Time Alignment ” and
“ Crossover ”.
Adjusting the cutoff frequency
value
You can adjust the cutoff frequency value of each speaker.
The following speakers can be adjusted:
Front
,
Rear
,
Subwoofer
p
“ Rear ” is available only when “ Rear Speaker ” is set to “ On ”.
 Refer to Setting the rear speaker output on page 68
p
“ Subwoofer ” is available only when “ Subwoofer ” is set to
“
On
”.

Refer to Setting the subwoofer output on page 68
1 Display the “ Audio ” setting screen.

Refer to Displaying the “ Audio ” setting screen on page 68
2 Touch [
Crossover
] or [
Subwoofer Settings
].
3 Touch [<] or [>] to switch the speaker.
4 Drag the graph line to set the cutoff position.
5 Drag the lowest point of the graph to set the
cutoff slope.
p
The following items can also be set.

⁂⁚⁓⁥⁗
:
Switches the subwoofer phase between normal and reverse
position.
 LPF / HPF :
Switches the LPF / HPF setting to “ On ” or “ Off ”.
When it is turned off, the high-pass filter or low-pass filter of
each speaker can also be turned on by touching the graph
lines.
Selecting the listening position
You can select a listening position that you want to make as the
center of sound effects.
The default setting is “ Off ”.
1 Display the “
Audio
” setting screen.
 Refer to Displaying the “
Audio
” setting screen on page 68
2 Touch [ Listening Position ].
3 Touch the desired position to change the lis-
tening position.
The following items are available:
Off , Front-L , Front-R , Front , All .
Audio adjustments
< CRB4817-A >
Audio adjustments