Pioneer AVIC-5200NEX, Руководство по эксплуатации

Страница: 65 / 92

65
2 Using packing tape or similar, place markings
as follows.
Rear bumper
25 cm
(9-7/8 in.)
25 cm
(9-7/8 in.)
50 cm (1 ft. 8 in.)
2 m (6 ft. 7 in.)
Markings
Markings
3 Display the “ System ” setting screen.

Refer to Displaying the “ System ” setting screen on page
63
4 Touch [ Camera settings ].
5 Touch [ Parking Assist Guide Adjust ].
6 Set the guidelines by dragging the four points.
Adjust the guidelines so that the guidelines can be overlaid to
the markings
p
Touch / / / / / to adjust the guidelines if
necessary. Touch [ Default ] to reset the settings.
Setting the second camera
You can view images of the second camera (a front camera etc.)
on the screen of this product.
Setting the second camera activation
The default setting is “
Off
”.
p
This function is synchronized with “ AV Input ” setting.
1 Display the “ System ” setting screen.

Refer to Displaying the “ System ” setting screen on page
63
2 Touch [ Camera settings ].
3 Touch [
2nd Camera Input
] to switch “
On
” or
“
Off
”.
Setting the reversed image
The default setting is “ Off ”.
p
This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
p
This function is available when “ AV Input ” is set to
“ Camera ” or “ 2nd Camera Input ” is set to “ On ”.
1 Display the “
System
” setting screen.
 Refer to Displaying the “
System
” setting screen on page
63
2 Touch [ Camera settings ].
3 Touch [ 2nd Camera: Reverse video ] to switch
“ On ” or “ Off ”.
Setting the camera for Camera
View mode
To display Camera View at all times, “ Camera View ” needs to be
set to “ On ”. (The same mode is turned on when is touched
on the camera view screen. The setting value is synchronized.)
The default setting is “ Off ”.
p
To set the rear view camera as the camera for Camera View
mode, set “ Back Camera Input ” to “ On ”.

Refer to Setting rear view camera activation on page 64
p
When using the second camera, set “ AV Input ” to
“ Camera ” or “ 2nd Camera Input ” to “ On ” (both settings are
synchronized).

Refer to Setting the second camera on page 65
1 Display the “
System
” setting screen.
 Refer to Displaying the “
System
” setting screen on page
63
2 Touch [ Camera settings ].
3 Touch [ Camera View ] to switch “ On ” or “ Off ”.
p
You can also turn this function on by touching [ Camera
View
] on the AV source selection screen or in the source
list.
Setting the demo mode
The default setting is “
On
”.
1 Display the “ System ” setting screen.
 Refer to Displaying the “ System ” setting screen on page
63
2 Touch [
Demo Mode
] to switch “
On
” or “
Off
”.
Selecting the system language
p
If the embedded language and the selected language setting
are not the same, text information may not display properly.
p
Some characters may not be displayed properly.
1 Display the “
System
” setting screen.
 Refer to Displaying the “
System
” setting screen on page
63
2 Touch [ System Language ].
3 Touch the language.
Setting the keyboard language
with the application for iPhone
You can use the keyboard in AppRadio Mode by setting the
language of the keyboard for iPhone.
p
This function is only available in AppRadio Mode on the
iPhone.
1 Display the “ System ” setting screen.

Refer to Displaying the “ System ” setting screen on page
63
2 Touch [ Keyboard ].
3 Touch the language.
Adjusting the response posi-
tions of the touch panel (touch
panel calibration)
7200NEX 6200NEX 5200NEX
If you feel that the touch panel keys on the screen deviate from
the actual positions that respond to your touch, adjust the
response positions of the touch panel screen.
p
This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
p
Do not use sharp pointed tools such as a ballpoint or
mechanical pen, which could damage the screen.
p
Do not turn off the engine while saving the adjusted position
data.
1 Display the “ System ” setting screen.
 Refer to Displaying the “ System ” setting screen on page
63
2 Touch [
Touch Panel Calibration
].
< CRB4817-A >
System settings