manualshive.com logo in svg

Pioneer AVIC-505, Руководство по обслуживанию

Поделиться
Скачать
Pioneer AVIC-505 Скачать руководство пользователя страница 2

2

AVIC-505

-

CD Player Service Precautions

1. For pickup unit(CXX1230) handling, please refer

to"Disassembly"(CX-597 Service Manual CRT1829).

During replacement, handling precautions shall be

taken to prevent an electrostatic discharge(protection

by a short pin).

2. During disassembly, be sure to turn the power off

since an internal IC might be destroyed when a

connector is plugged or unplugged.

3. Please checking the grating after changing the

service pickup unit(see page 64).

CAUTION

This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair
complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely; you should not risk trying to do so
and refer the repair to a qualified service technician.

WARNING

This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of
California to cause cancer, birth defects or other reproductive harm. 
Health & Safety Code Section 25249.6 - Proposition 65

1. SAFETY INFORMATION

1.1 AVIC-505/US

Содержание AVIC-505







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды