Pioneer AVH-X8850BT, Руководство пользователя

Страница: 30 / 128

30
3 Touch [ AppRadio Video Adjustment ].
4 Touch [ OK ].
5 Touch , , or to adjust the line to fit
smartphone image size.
6 Touch [
Preview
].
7 Touch [ OK ].
 If you want to adjust the setting again from the
beginning, touch [ RESET ].
Using the audio mix function
You can output audio mixing AV source and an application for
iPhone or smartphone when
AppRadio Mode
is used.
p
Depending on the application or the AV source, this function
may not be available.
1 Start up AppRadio Mode .
 Refer to Starting procedure on page 30
2 Press the VOL ( + / – ) button.
The audio mix menu will be displayed on the screen.
p
The audio mix menu is displayed for four seconds. If the
screen disappears, press the VOL ( + / – ) button again. The
screen reappears.
p
The AV operation screen and the Application screen can be
switched by pressing the
MODE
button.
1 2 3
1
Touch to mute. Touch again to unmute.
2 Sets whether to switch the sound mix function on or off.
 Left tab:
The audio mix function is enabled (mix on) and the App
volume is displayed.

Right tab:
The audio mix function is disabled (mix off).
p
The right tab is not displayed on the AV operation screen.
 For details about Android device compatibility with this
product, refer to the information on our website.
Using AppRadio Mode
You can control applications for an iPhone or a smartphone
directly from the screen (
AppRadio Mode
).
In AppRadio Mode , you can operate applications with finger
gestures such as tapping, dragging, scrolling or flicking on the
screen of this product.
Important
 To use
AppRadio Mode
, install the AppRadio app on the
iPhone or smartphone in advance. For details about the
AppRadio app, visit the following site:
http://www.pioneer.eu/AppRadioMode
 Be sure to read Using app-based connected content before
you perform this operation.
 Refer to Using app-based connected content on page 67
 Content and functionality of compatible applications are
the responsibility of the App providers.
 In AppRadio Mode , usage is limited while driving, with
availability of functions and content determined by the
App providers.
 AppRadio Mode allows access to applications other
than those listed, subject to limitations while driving.

PIONEER IS NOT RESPONSIBLE AND DISCLAIMS
LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS
AND CONTENT, INCLUDING WITHOUT LIMITATION ANY
INACCURACIES OR INCOMPLETE INFORMATION.
p
In this chapter, iPhone and iPod touch will be referred to as
“iPhone”.
p
The compatible finger gestures vary depending on the
application for an iPhone or a smartphone.
p
Even though an application is not compatible with
AppRadio Mode , depending on the application an image
may be displayed. But you can not operate the application.
Starting procedure
When connecting an iPhone or smartphone to this product,
select the method for connecting your device. Settings are
required according to the connected device.
 Refer to Setup for iPod / iPhone or smartphone on page 16
p
Touch the desired application icon after the AppRadio app is
launched.
After the desired application is launched, the application
operation screen appears.
p
If you connect your device while an AppRadio Mode -
compatible application is already running, the application
operation screen will appear on this product.
p
Press the button to go back to the top menu screen.
For iPhone users
p
When you use an iPhone with a Lightning connector,
connect the iPhone to this product via Bluetooth wireless
technology and unlock the iPhone in advance.
 Refer to Registering your Bluetooth devices on page 12
1 Connect your iPhone.
 Refer to iPhone with Lightning connector on page 54

Refer to iPhone with 30-pin connector on page 54
2 Press the button.
3 Touch [
APPS ].
p
When you use an iPhone with a 30-pin connector, messages
appear on the screen of this product and your iPhone.
Proceed to the next step.
p
When you use an iPhone with a Lightning connector, the
AppRadio app is launched, and the AppRadio Mode
screen (Application menu screen) appears after this step. In
such a case, the following steps are not required.
4 Use your iPhone to launch the application.
The
AppRadio app
is launched.
5 Touch [
OK
] on the screen of this product.
The AppRadio Mode screen (Application menu screen)
appears.
For smartphone (Android) users
1 Register your smartphone and connect it to this
product via Bluetooth wireless technology.

Refer to
Registering your Bluetooth devices
on page 12
2 Unlock your smartphone and connect it to this
product.
 Refer to Android device on page 55
3 Press the button.
4 Touch [
APPS
].
The
AppRadio app
is launched, and the
AppRadio Mode
screen (Application menu screen) appears.
Using the keyboard (for iPhone
users)
When you tap the text input area of an application for iPhone,
a keyboard will be displayed on the screen. You can input the
desired text directly from this product.
p
This function may not be available depending on your
iPhone.
p
This function is only available in AppRadio Mode on the
iPhone.
CAUTION
For your safety, the keyboard functionality is only available
when the vehicle is stopped and the handbrake is engaged.
1 Set the keyboard language.
 Refer to Setting the keyboard language with the application for
iPhone on page 40
2 Start up AppRadio Mode .
 Refer to Starting procedure on page 30
3 Touch the text input area on the application
operation screen.
A keyboard for entering text appears.
Adjusting the image size (for
smartphone (Android) users)
Black dots may appear on the screen when using AppRadio
Mode with an Android device connected to this product.
p
This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p
This function can be set when your Android device is able to
enter AppRadio Mode .
p
The setting screen automatically appears in the following
cases:
— When entering AppRadio Mode after a Bluetooth
connection using SPP (Serial Port Profile) has been
established.
— When a Bluetooth connection using SPP (Serial Port
Profile) has been established in AppRadio Mode .
1 Display the “ System ” setting screen.
2 Touch [
Input/Output Settings
].
30 < CRD4941-A > < CRD4941-A >
AppRadio Mode AppRadio Mode