Pioneer AVH-X8600BT, Руководство по эксплуатации

Страница: 24 / 156

6 Wait until your Bluetooth device ap-
pears in the list.
p
If you cannot find the Bluetooth device that
you want to connect, check that the device
is waiting for a Bluetooth wireless technol-
ogy connection.
7 Touch the Bluetooth device name you
want to register.
While connecting,
“
Pairing
…
Please wait.
”
is
displayed. If the connection is established,
“
Paired.
”
is displayed.
p
If your device supports SSP (Secure Simple
Pairing), a six-digit number appears on the
display of this product. Touch [
Yes
] to pair-
ing the device.
p
If the connection fails,
“
Error
”
is displayed.
In such cases, try again from the begin-
ning.
p
The PIN code is set to
“
0000
”
as the default,
but can be changed.
=
For details, refer to Entering the PIN code
for Bluetooth wireless connection on
page 26.
p
Once the connection is established, the de-
vice name is displayed. Touch the device
name to disconnect.
After the device is successfully registered, a
Bluetooth connection is established from the
system.
The profile icons in the registered device list
screen are displayed and illuminated as fol-
lows.
Illuminates when your mobile de-
vice is successfully connected with
the HFP (Hands-Free Profile).
Illuminates when your audio de-
vice is successfully connected with
the A2DP (Advanced Audio Distri-
bution Profile)/AVRCP (Audio/
Video Remote Control Profile).
Illuminates when the Bluetooth
connection is established with the
SPP (Serial Port Profile).
p
After pairing, the phone book registered in
the device may be automatically trans-
mitted to this product.
#
If you touch the following key, you can switch
the display between the device names and
Bluetooth device addresses.
Switches between the device
names and Bluetooth device ad-
dresses.
Pairing from your Bluetooth
devices
You can register a Bluetooth device by setting
this product to standby mode and requesting
a connection from the Bluetooth device.
p
Before registration, make sure that
“
Visibi-
lity
”
in the
“
Bluetooth
”
menu is set to
“
On
”
.
=
For details, refer to Switching visibility on
page 26.
1 Activate the Bluetooth wireless tech-
nology on your devices.
p
For some Bluetooth devices, no specific ac-
tion is necessary to activate Bluetooth wire-
less technology. For details, refer to the
instruction manual of your devices.
2 Use the Bluetooth setting in the device
to pair this product with the device.
p
If a PIN code input is required, enter a PIN
code. (The default PIN code is
“
0000
”
.)
When the device is successfully registered,
the connection settings are made from the
device.
p
If registration fails, repeat the procedure
from the beginning.
Connecting to a Bluetooth
device automatically
If this function is set to on, a connection be-
tween your Bluetooth device and this product
will take place automatically as soon as the
two devices are less than a few metres apart.
Initially, this function is set to on.
p
If this function is set to on, a connection
with the last connected Bluetooth device
will be established automatically when the
ignition switch is turned on.
Engb
24
Chapter
03
Registering and connecting a Bluetooth device