Pioneer AVH-X8500BHS, Руководство пользователя

Страница: 11 / 228

Adjusting the angle of the
LCD panel and ejecting media
CAUTION
Keep hands and fingers clear of the unit when
opening, closing, or adjusting the LCD panel. Be
especially cautious of children
’
s hands and fin-
gers.
Adjusting the LCD panel angle
1 Press h (eject) to display the ejecting
menu.
2 Adjust the LCD panel to an easily view-
able angle.
Laying the panel down.
Returning the panel to the upright
position.
#
As the set angle is saved, the LCD panel will au-
tomatically be adjusted to the same position the next
time the LCD panel is opened.
Ejecting a disc
1 Press
h
(eject) to display the ejecting
menu.
2 Eject a disc.
Ejecting a disc.
Ejecting an SD
1 Press
h
(eject) to display the ejecting
menu.
2 Eject an SD.
Ejecting an SD.
3 Press an SD to eject.
Removing the front panel
CAUTION
!
Do not attempt to detach the front panel
while DISC/SD is in the eject position.
!
Do not attempt to detach the front panel
while data is being written to USB/SD.
Doing so may cause the data to become cor-
rupted.
!
After the front panel has been detached, the
attaching plate will move back to its original
position automatically.
Be careful not to let hands or other objects
get caught behind the monitor as it is mov-
ing back.
!
Please make sure that the front panel is in its
original position while the vehicle is in mo-
tion.
It is dangerous to drive with the front panel
sticking out.
!
Do not place beverages or other objects on
top of the front panel while it is fully open.
Important
!
Handle the front panel with care when re-
moving or attaching it.
!
Avoid subjecting the front panel to excessive
shock.
!
Keep the front panel out of direct sunlight
and high temperatures.
!
If removed, replace the front panel on the
unit before starting up your vehicle.
1 Press
h
(eject) to release the front panel.
2 Touch the detach key.
The front panel automati-
cally slides toward you.
3 Slide the dial at the bottom of the front
panel to the right, and lift up the front panel
while pushing down on the dial.
4 Put the front panel into the provided pro-
tective case for safe keeping.
Attaching the front panel
1 Slide the front panel into the top of the
unit and push it into place.
Slide the inserter on the front panel into the in-
sertion slot on top of the unit and push it into
place.
2 Push on the bottom of the front panel
until it clicks into place.
Setting the clock
1 Touch the Clock key.
The
Clock Adjustment
screen appears.
For details refer to Home display on page 7.
2 Select the item to set.
3 Touch
a
or
b
to set the correct date and
time.
English
Basic operations
11
Section
Basic operations
En
05
<YRD5376-A/N>11