Pioneer AVH-X7700BT/XNEW5, Руководство по обслуживанию

Страница: 32 / 180

AVH-X7700BT/XNUC
32
1 2 3 4
1 2 3 4
C
D
F
A
B
E
5.6 MECHANICAL DESCRIPTION
Overview of FLAP operation
1. FLAP is operated by two motors; motor for backward and forward drive (EXA4013) and motor for angle drive (EXA4013).
2. To detect the operating status of angle and the operating position, the analog potential generated from angle encoder is
detected.
3. The angle last position memory function memorizes the last position into MCU using 256 resolution STEP of VDD.
4. To detect the horizontal operating status, the analog signal of O/C/D SW* is detected.
5. At the reset start, the ejection operation is carried out and the system enters the startup status after entering storage
status once.
6. The angle is adjusted with angle keys (+/-).
7. OPEN/CLOSE key stores and ejects the monitor. Temporary folding key temporarily folds the monitor.
8. On the navigation menu screen, monitor automatic storage ejection ON/OFF and setback ON/OFF when ACC is turned
ON/OFF are set.
*O/C/D SW
Detection by OPENSW, CLOSESW and DEG0SW are consolidated to one pin and the signal is detected as an analog signal.
O/C/D SW voltage (V)
Status Description OPENSW CLOSESW DEG0SW MIN TYP MAX
1 Storage position OFF OFF OFF 3.00 3.25 —
2 Horizontal indefinite position (angle 0 degree) ON ON OFF 1.29 1.52 1.82
3 Eject position OFF ON OFF 2.40 2.67 2.99
4 Rising OFF ON ON
0.51 1.02 1.28
5 Setback ON ON ON — 0.00 0.50
5 Horizontal indefinite position (except angle 0 degree) ON ON ON
6 20mm before storage position ON OFF OFF 1.82 2.07 2.39
27H ~ 63H
00H ~ 26H
8DH ~ B9H
O/C/D SW
analog signal (AD)
E8H ~ FFH
64H ~ 8CH
BAH ~ E7H
Description of FLAP ejection operation
(1) When OPEN key is pressed or the automatic switching setting is turned ON, the motor for angle drive is rotated in 0°
direction for 500 ms (pushing operation is carried out) after ACC is set to ON.
(2) In 500 ms, the motor for angle drive is stopped and the motor for backward and forward drive is rotated in ejection
direction.
(3) If the status of analog signal of O/C/D SW changes from 2 to 3, the motor for backward and forward drive is
continuously rotated in ejection direction for 600 ms.