Setting the speaker setting
You can make a fine adjustment on each
speaker installed in your vehicle. You can
change the size of each speaker according to
the speaker specification. On a spot at which
a speaker is not installed, you can set the ad-
justment to
OFF
.
The adjustment you made will be memorized
into this unit and you can recall it.
Recalling speaker settings
%
Touch SPEAKER SETTING on the sound
setting menu to select the speaker setting.
Touch
SPEAKER SETTING
repeatedly to switch
between the following speaker settings:
CUSTOM1
—
CUSTOM2
—
CUSTOM3
—
AUTO
—
LAST MEMORY
#
You can select
LAST MEMORY
only when the
adjusted speaker setting is not memorized in this
unit.
#
You cannot select
AUTO
when
NETWORK
has been selected. (Refer to
#
When
STANDARD
has been selected, you
cannot select
AUTO
if auto TA and EQ has not
been carried out.
Customizing the speaker setting
You need to make with/without (or yes/no) and
size (bass reproducing capacity) selection/ad-
justments depending on the installed speak-
ers. The size needs to be set to
LARGE
(large)
if the speaker is capable of reproducing
sounds of about 100 Hz or below. Otherwise
select
SMALL
(small).
!
Low frequency range is not output if the
subwoofer is set to
OFF
and the front and
rear speakers set to
SMALL
or
OFF
.
!
It is imperative that non-installed speakers
be set to
OFF
.
!
Set the front or rear speaker to
LARGE
if
the speaker is capable of reproducing bass
content, or if no subwoofer is installed.
1
Recall the speaker setting you want to
adjust.
Refer to
2
Touch ADJ. next to SPEAKER SETTING
on the sound setting menu.
3
Touch
or
to select the correct size
for the speaker.
Each time you touch
or
it selects the size
in the following order:
OFF
(off)
—
SMALL
(small)
—
LARGE
(large)
#
You cannot select
OFF
in the front speaker set-
ting.
#
You can turn
ON
or
OFF
in the subwoofer set-
ting.
#
When the rear speaker setting is set to
OFF
,
the rear center speaker switches to
OFF
automati-
cally.
Notes
!
You can set the installed speakers or subwoo-
fer to
OFF
.
!
Auto TA and EQ (refer to
(auto-time alignment and auto-equalizing)
page 96) is carried out depending on the
speaker setting in
SETTING1
(refer to
—
When carrying out auto TA and EQ, the
speakers set to
SMALL
or
LARGE
may be
changed according to the characteristics
of the speakers. However, the speakers set
to
OFF
are not changed.
—
When carrying out auto TA and EQ, a
speaker that is not installed or whose
sound is too small is set to
OFF
.
Audio Adjustments
En
91
Section
17
Audio
Adjustments
