Introduction of setup
adjustments
1
Setup menu display
Shows the setup function names.
1
Touch AV MENU and then touch SETUP
to display the setup function names.
The setup function names are displayed and
operable ones are highlighted.
2
Touch ESC to return to the display of
each source.
#
To return to the previous display, touch
BACK
.
Setting the AV input
This unit is equipped with two video inputs,
VCR1 IN
and
VCR2 IN
. You can connect up to
two AV components to this unit and display vi-
deos either from an
AV
source or
S-DVD
source.
Switch the AV input setting depending on the
AV components connected to
VCR1 IN
and
VCR2 IN
.
!
Select
VIDEO
to watch video of a con-
nected component as
AV
source.
!
Select
S-DVD
to watch video of a con-
nected DVD player as
S-DVD
source.
!
Select
CAMERA
to watch a rear view cam-
era video while you are backing your vehi-
cle.
Notes
!
In
AV INPUT1
, you can select the same set-
ting as
AV INPUT2
, and vice versa.
!
If you have selected the same setting in
AV INPUT1
and
AV INPUT2
, video of the AV
component connected to
VCR1 IN
is output.
When AV component is
connected to AV input 1
%
Touch AV INPUT1 on the setup menu to
select the AV input 1 setting.
Touch
AV INPUT1
until the desired setting is
selected.
!
OFF
–
No video component connected
!
VIDEO
–
External video component (such
as portable video player)
!
S-DVD
–
DVD player connected with RCA
cable
!
EXT-V
–
External unit which can output
video
#
When a DVD player is connected with an AV-
BUS cable, do not select
S-DVD
otherwise no pic-
ture will be displayed even if you select
S-DVD
as
a source.
Setup
En
Section
18