16
English
Español
Deutsch
Français
Italiano
Nederlands
• When installing in a shallow space,
use the following screw holes. In
this case, stick conceal tape on parts
that protrude from the dashboard.
Fig. 15
*2 If the screw holes of the bracket and the
screw holes of this unit are not aligned, use a
file to widen the screw holes of the bracket to
match up the screw holes on this unit.
Tighten the screws at 2 places on each side.
Fig. 16
Fixing the front panel
If you do not operate the removing and
attaching the front panel function, use
the supplied fixing screws to fix the
front panel to this unit.
• Fix the front panel to the unit
using fixing screws after remov-
ing the front panel. (Fig. 17)
Fig. 17
Installing the remote control unit
When not using the remote control
unit, secure it with velcro tape to pre-
vent it from moving.
• Thoroughly wipe off the surface
before affixing the velcro tape.
Fig. 18
Velcro tape (small)
(hard)
Velcro tape (small)
(soft)
Remote control
unit
Fixing screw
Fixing screw
Screw
Dashboard or
Console
Factory radio mounting
bracket
*2
*1
*1
Conceal tape
