Pioneer AVH-P7550DVD, Руководство по эксплуатации

Страница: 17 / 104

Loading a disc
% Insert a disc into the disc loading slot.
Playback will automatically start.
# If DVD AUTO PLAY is turned off, touch the
source icon and then touch DVD to select DVD
(refer to the previous page).
# When a disc is loaded in this unit, touch the
source icon and then touch DVD to select DVD .
# To eject a disc, press EJECT .
Notes
! The DVD player plays one, standard, 12-cm or
8-cm (single) disc at a time. Do not use an
adapter when playing 8-cm discs.
! Do not insert anything other than a disc into
the disc loading slot. Discs which can be
played back are listed on
Playable discs on
page 6.
! If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT to eject the disc, and check the
disc for damage before inserting the disc
again.
! If the DVD player does not operate properly,
an error message such as
ERROR-02 may be
displayed. Refer to Error messages on page
90.
Adjusting the volume
% Use VOLUME to adjust the sound level.
With the head unit, rotate VOLUME to in-
crease or decrease the volume.
With the remote control, press VOLUME to in-
crease or decrease the volume.
Turning the unit off
% When using the touch panel keys,
touch the source icon and then touch OFF.
# When the source icon is not displayed, you
can display it by touching the screen.
% When using the button, press SOURCE
and hold until the unit turns off.
Using the rear display
You can watch the video sources (such as
DVD or AV ) on rear display independently of
front display.
! If you watch a DVD/Video CD on the rear
display only, switch the operation mode on
the remote control to DVD . And you can
operate the DVD/Video CD playback on the
rear display independently by the remote
control. (Refer to page 14.)
CAUTION
When you have turned the rear display output on
by pressing
REAR ON , you cannot turn it off even
if you press SOURCE and hold. In this case, press
REAR ON and hold to turn the rear display output
off.
% Press REAR ON to select the video
source on the rear display.
Press REAR ON repeatedly to switch between
the following video sources:
F. SOURCE (same source as the front display)
DVD (built-in DVD player) AV (video input)
Rear display output is turned on and the illu-
mination color of REAR ON changes into the
different color than the other buttons.
# You can also perform this operation by press-
ing REAR.S on the remote control.
# To turn the rear display output off, press
REAR ON and hold.
Basic Operations
En
17
Section
04
Basic
Operations