Pioneer AVH-1480DVD, Руководство пользователя

Страница: 163 / 188

Blue/white (5*)
The pin position of the ISO
connector will differ depending on
the type of vehicle. Connect 5* and
6* when Pin 5 is an antenna control
type. In another type of vehicle,
never connect 5* and 6*.
Blue/white (6*)
Connect to auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
Power supply side
Ground side
Parking brake
switch
Light green
Used to detect the ON/OFF status of the parking
brake. This lead must be connected to the power
supply side of the parking brake switch.
Connection method
1. Clamp the lead.
2. Clamp firmly with
needle-nosed pliers.
Note:
· The position of the parking brake switch depends on the vehicle model. For details, consult the
vehicle Owner’s Manual or dealer.
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio Mute lead on
that equipment. If not, keep the Audio Mute lead free of any connections.
Violet/white
Of the two lead wires connected to the back lamp, connect the one in which the
voltage changes when the gear shift is in the REVERSE (R) position. This connection
enables the unit to sense whether the car is moving forwards or backwards.
Fuse resistor
Microphone (AVH-2480BT only)
4 m
Microphone input (AVH-2480BT only)
Wired remote input
Hard-wired remote control adaptor can be connected (sold separately).
En
63
Section
12
Installation
Installation