6
Compass
Shows the direction your vehicle is travel-
ling.
7
Longitude and latitude (LON./LAT.)
Shows the longitude and latitude of the cur-
rent location of your vehicle.
8
Speedometer (SPEED)
Shows your vehicle speed.
Vehicle status mode
1
3
5
2
4
You can customize the graph and the back-
ground.
!
To customize the graph, refer to
Customiz-
ing the graph
on page 17.
!
To select the background, refer to
Selecting
the background display
on page 14.
1
Graph
Shows the graph of speed vs time.
2
Time (TIME)
Shows the current time.
3
Speedometer (SPEED)
Shows your vehicle speed.
4
Tachometer (TACH)
Shows the engine speed in revolutions per
minute (rpm).
5
Acceleration (ACC.G)
Shows the acceleration in a forward direc-
tion. The + sign indicates acceleration
while the
sign indicates deceleration
(braking).
Selecting gauges
You can change the combination of gauges.
!
This function can be operated only when
selecting the analog mode.
1 Touch Select Gauge.
The touch panel keys for selecting the gauges
are displayed.
#
When
Select Gauge
is not displayed, you can
display it by touching the screen.
2 Touch the middle of a gauge that you
want to change.
The cursor moves to the selected gauge.
3 Touch
i
or
j
to select the gauge type.
Each time you touch
i
or
j
selects the
gauge types in the following order:
TACH
(tachometer)
BATT.
(voltmeter)
ACC.G
(accelerometer)
LAT.G
(lateral ac-
celerometer)
POWER
(horsepower meter)
TORQUE
(torque meter)
tiltmeter
SPEED
(speedometer)
4 Touch
k
or
l
to switch among the po-
sition of the gauges.
Basic Operations
En
12
Section
03
