7
Component Parts and Features
Key Finder
1
SEL/POWER button
Selects the system’s audio and video
simultaneously. If AV equipment is
connected to the system’s RCA audio
and video output terminals, the audio
and video of the source selected with
this button are generated.
Pressing this button for 2 seconds also
switches power ON/OFF.
2
V.SEL button
Selects only the display’s video.
3
SP.SEL button
Selects only the built-in speaker’s
audio.
4
WIDE/MENU button
Changes the method of enlarging 4:3
video to 16:9 video. Pressing this but-
ton for 2 seconds, and displayed the
setup menu. Once the setup menu is
displayed, its menu is switched each
time the button is pressed.
5
Volume control (
∞
/
5
) buttons
Adjust the volume of the built-in
speaker
9
, or change setup items when
the setup menu is displayed.
Note:
• Never set the volume so high that you
cannot hear outside traffic and emergency
vehicles.
6
2
/
3
buttons
Adjust the item when the setup menu is
displayed.
7
Ambient light sensor
Senses ambient light. This system auto-
matically adjusts the brightness of the
display to compensate for ambient
light.
8
Signal receptor
This receiver receives signals from the
remote controller supplied with the
mobile navigation unit and other AV
equipment.
9
Built-in speaker
Outputs sound from audio equipment
connected to this product.
0
Lock release lever
(Refer to page 3.)
