13
<ARE7263>
En
English
SPECIFICATIONS
Amplifier Section
Continuous rated power output of 60 watts* per
channel, min., at 4 ohms, from 20 Hz to 20,000 Hz
with no more than 0.3 %** total harmonic distor-
tion.
Input sensitivity/impedance
PHONO (MM) ........................................... 2.8 mV/50 k
Ω
CD, TUNER, LINE/SB, TAPE1/CD-R/MD, TAPE2 MONITOR
.................................................................. 200 mV/50 k
Ω
PHONO (MM) overload level
1 kHz, T.H.D. 0.1 % ............................................ 150 mV
Output level/impedance
TAPE1 REC, TAPE2 MONITOR REC ......... 200 mV/1 k
Ω
Frequency response
PHONO (MM) .......................... 20 Hz to 20 kHz,
±
0.5 dB
CD, TUNER, LINE/SB, TAPE1/CD-R/MD, TAPE2 MONITOR
................................................ 5 Hz to 100 kHz,
+0
–3
dB***
Tone control
BASS ...................................................... ±8 dB (100 Hz)
TREBLE ................................................... ±8 dB (10 kHz)
Loudness contour (volume control set at –30 dB position)
........................................ +6 dB (100 Hz)/+4 dB (10 kHz)
Signal-to-Noise ratio (IHF short circuit, A network)
PHONO (MM, 5 mV input) ............................. 85 dB***
CD, TUNER, LINE/SB, TAPE1/CD-R/MD, TAPE2 MONITOR
....................................................................... 106 dB***
Power Supply/Miscellaneous
Power requirements ................................. AC 120 V, 60 Hz
Power consumption ................................................... 145 W
Dimensions (including knobs and other protruding parts)
....................................... 420 (W) x 114 (H) x 307 (D) mm
Weight (without package) ........................................... 5.9 kg
Accessories
Remote control unit ........................................................... 1
Batteries (AA/R6P) ............................................................. 2
Power cord (Rated current 7 A) ......................................... 1
Operating instructions ........................................................ 1
Warranty card ..................................................................... 1
NOTE:
Specifications and design are subject to possible modifica-
tions without notice, due to improvements.
*
Measured pursuant to the Federal Trade Commission’s
Trade Regulation rule on Power Output Claims for Ampli-
fiers.
** Measured by Audio Spectrum Analyzer.
*** Measured with DIRECT button set to on.
Published by Pioneer Corporation.
Copyright © 2000 Pioneer Corporation.
All rights reserved.
