background image

 

Setting up the receiver

07

 

46

 

En

 

Use 

 

 

 or 

 

 

 to set the distance of the 

center speaker from the main listening 
position  (within the range of 0.5 ft. to 45 
ft.).

 

• When 

 

C

 

 is selected in the speaker 

setting, the center speaker distance can’t 
be set.

 

Front right speaker distance setting

 

• Default setting: 

 

10 ft.

 

Sets the distance from the front right speaker 
to the listening position.

 

Use 

 

 

 or 

 

 

 to set the distance of the 

front right speaker from the main 
listening position (within the range of 0.5 
ft. to 45 ft.).

 

Surround right speaker distance 
setting

 

• Default setting: 

 

10 ft.

 

You should set the distance of the surround 
speakers accurately to hear sounds coming 
from all speakers at the same time.

 

Use 

 

 

 or 

 

 

 to set the distance of the 

surround right speaker from the main 
listening position  (within the range of 0.5 
ft. to 45 ft.).

 

• When 

 

S

 

 is selected in the speaker 

setting, the surround speaker distance 
can’t be set.

 

Surround back speaker distance 
setting

 

• Default setting: 

 

10 ft.

 

You should set the distance of the surround 
back speakers accurately to hear sounds 
coming from all speakers at the same time.

 

Use 

 

 

 or 

 

 

 to set the distance of the 

surround back speakers from the main 
listening position  (within the range of 0.5 
ft. to 45 ft.).

 

• When 

 

SB

 

 or 

 

SB SW

 

 is selected in the 

surround back speaker setting, the 
surround back speaker distance can’t be 
set.

 

Surround left speaker distance 
setting

 

• Default setting: 

 

10 ft.

 

You should set the distance of the surround 
speakers accurately to hear sounds coming 
from all speakers at the same time.

 

Use 

 

 

 or 

 

 

 to set the distance of the 

surround left speaker from the main 
listening position  (within the range of 0.5 
ft. to 45 ft.).

 

• When 

 

S

 

 is selected in the speaker 

setting, the surround speaker distance 
can’t be set.

 

Subwoofer distance setting

 

• Default setting: 

 

10 ft.

 

Like your speakers, you should set the 
distance of the subwoofer accurately to hear 
sounds from all speakers at the same time. 

VSX_D912.book.fm 46 ページ 2003年12月5日 金曜日 午前9時43分

Содержание 814 - Steiner 10x44 Peregrine XP Binocular








































































Отзывы: