En
6
!
Depending on power-saving settings and other conditions of the PC/Mac, the
CPU and hard disk may not provide sufficient processing capabilities. For
laptops in particular, make sure the PC/Mac is in the best condition to provide
constant high-level performance when using Serato DJ Pro (e.g. by keeping
the AC power connected).
!
To use the internet, you need a separate contract with an internet service
provider, which you may have to pay for.
Downloading the Serato DJ Pro software
1 Visit the Serato website.
http://serato.com/
2 Click
[Serato DJ Pro]
under
[Products]
.
The Serato DJ Pro download page is displayed.
!
The download page is subject to change.
3 Click
[DOWNLOAD v*.*]
.
4 Create a Serato.com user account.
!
If you’ve already registered an account, skip to step 6.
!
If you haven’t finished registering your account, follow the steps
below.
— Following the instructions on the screen, enter your email
address and create a password, then select the region
where you live.
— If you check
[Go backstage with Serato]
, you’ll receive
newsletters with the latest information on Serato Limited
products.
— Once you’ve finished registering your user account, you’ll
receive an email. Check the contents of the email.
!
Be careful not to forget the email address and password you
used to register. You’ll need them to update the software in
future.
!
The personal information you entered when registering your
user account may be collected, processed, and used based on
the privacy policy on the Serato Limited website.
5 Click the link in the email you received from Serato.com.
This takes you to the Serato DJ Pro download page.
6 Log in.
Enter the email address and password you registered to log in to
Serato.com.
7 Select
[A laptop with a supported controller, mixer or
interface]
on the download page, and click
[DOWNLOAD
SERATO DJ PRO]
to download the software.
Installation procedure (Mac)
Do not connect the unit to your Mac until installation is complete.
!
Quit any other programs that are running on your Mac.
1 Unzip the downloaded driver software
(DDJ1000SRTXXXdmg.zip).
2 Double-click
[DDJ-1000SRT_M_X.X.X.dmg]
.
3 Double-click
[DDJ-1000SRT_AudioDriver.pkg]
.
4 Follow the on-screen instructions to install.
5 Unzip the downloaded Serato DJ Pro software file.
6 Double-click the unzipped software file to launch the
installer.
7 Read the terms of the license agreement carefully, and if
you agree, click
[Agree]
.
!
If you don’t agree to the contents of the license agreement, click
[Disagree]
to cancel installation.
8 Click
[Install]
.
9 Follow the on-screen instructions to install.
10 Click
[Close]
to quit the installer.
Installation procedure (Windows)
Do not connect the unit to your PC until installation is complete.
!
Log in to the administrator account on your PC before starting
installation.
!
Quit any other programs that are running.
1 Unzip the downloaded driver software
(DDJ1000SRTXXXXexe.zip).
2 Double-click
[DDJ-1000SRT_X.XXX.exe]
.
3 Follow the on-screen instructions to install.
If
[Windows Security]
appears on the screen during installation,
click
[Install this driver software anyway]
and continue with the
installation.
When the installation program is finished, a completion message
appears.
After installing the driver software, install the Serato DJ Pro software.
4 Unzip the downloaded Serato DJ Pro software file.
5 Double-click the unzipped software file to launch the
installer.
6 Read the terms of the license agreement carefully, and
if you agree, select
[I agree to the license terms and
conditions]
, then click
[Install]
.
!
If you don’t agree to the contents of the license agreement, click
[Close]
to cancel installation.
A message indicating successful installation appears when installation
is complete.
7 Click
[Close]
to quit the Serato DJ Pro installer.
