En
7
Before
you
start
Attaching the stand
You can easily attach and remove the stand to/from this product. If using
this unit placed side by side with previous DJ players or DJ mixers, you
can align the operation panels at the same level by attaching the stand
to this unit.
How to attach
1 Insert the protrusions on the stand into the guide
holes on the bottom of this unit.
2 Push the stand until it clicks into place.
3 Check that the two release levers are firmly hooked
on this unit and are not released.
How to remove
1 Move the two release levers on the bottom of the
stand inward to release the lock.
2 Remove the stand.
Release lever
CAUTION
You may drop the product if you release the lock of the release lever
while the product is lifted.Hold the product tightly and remove the stand
from it.
