PIONEER DJ DJM-S11, Инструкция по эксплуатации

Страница: 112 / 126

112
Settings
Replacing the bumper for the crossfader
Be sure to follow the directions for safe use of the product.
Note that if you replace parts of the unit, you do so under your own responsibility.
WARNING
• Turn the unit off before starting the work.
• Never turn the unit on until the work is complete.
• Never touch areas other than the indicated ones.
• Never use parts other than those supplied.
• Take care not to drop the removed parts inside the unit.
• Do not work with wet hands.
• Do not work with liquids placed nearby.
• Do not work in a place where this unit may come into contact with liquids.
CAUTION
Perform the replacement with attention to the following.
• Work in a flat and non-slip place.
• Do not work in a dusty place.
• Store the removed parts in a safe place until you reinstall them.
• Keep small parts out of the reach of children and infants. If accidentally swallowed, contact
a doctor immediately.
• If you drop parts inside the unit and can’t retrieve them, leave the unit’s power switched off
and disconnect the power cord. Then contact a service center to request repairs.
DISCLAIMER
• If you replace parts of the unit, you do so under your own responsibility. Read the
descriptions in this document carefully and perform the work with caution.
• Note that we will accept no responsibility whatsoever for any loss or damage resulting from
the replacement of parts.
• If you lose or damage the parts during replacement, you will need to pay for new
replacement parts, even within the warranty period.
• If malfunctions, damages, or any other conditions that require repair occur with this product
as a result of the replacement of parts, you will need to pay for the necessary repairs, even
within the warranty period. (The unit may not fit for repair, depending on the damaged
condition.)