En
11
English
Rear panel
2
3
5
5
9
b
c
d
a
1
4
78
6
1
Kensington security slot
2
BOOTH output terminal
These are the output terminals for a booth monitor. Compatible with
balanced or unbalanced output for 1/4” TRS connectors.
3
MASTER 2 terminals
Connect to a power amplifier, etc.
4
MASTER 1 terminals
Connect powered speakers, etc., here.
5
PHONO/LINE input terminals
Connect a phono level (for MM cartridges) output device (analog
player, etc.) or a line level output device (DJ player, etc.). Switch
the input source according to the connected device using the
[
LINE/PHONO
] switch on this unit’s rear panel.
6
LINE/PHONO switch
Selects the input source of each channel from the components con-
nected to this unit.
—
[
PHONO
]: Select this to use a phono level (for MM cartridges)
output device (analog player, etc.) connected to the [
PHONO/
LINE
] input terminals.
—
[
LINE
]: Select this to use a line level output device (DJ player,
etc.) connected to the [
PHONO/LINE
] input terminals.
!
Different input sources cannot be selected for both channels.
7
PC MIX switch
—
[
ON
]: Outputs the audio of the external device from this unit via a
computer. This enables performances using the mixer functions
or effect functions of rekordbox for the audio of the external
device.
!
For use with this setting, be sure to connect a computer and
then start rekordbox.
—
[
OFF
]: Outputs the audio of the external device from this unit not
via a computer. This allows you to output the audio of an external
device from this unit without connecting a computer.
!
With this setting, the volume can be adjusted using the chan-
nel fader and crossfader of this unit, but functions such as
EQ and FILTER cannot be used. For the detailed operation of
each button and control, see the Operating Instructions.
8
SIGNAL GND terminal
Connects an analog player’s ground wire here. This helps reduce
noise when the analog player is connected.
9
MIC input terminal
Connects a microphone here.
Compatible with a 1/4” TS jack.
a
USB
terminal
Connect to a computer.
b
DC IN terminal
Connect to a power outlet using the included AC adapter (with the
included power cord connected).
c
Cord hook
Catch the AC adapter’s power cord and USB cable on this hook
when using this unit.
d
STANDBY/ON switch
This switches this unit’s power between on and standby.
Front panel
1
2
3
1
PHONES output terminals
Connect headphones here.
Compatible with a 1/4” TRS jack and 3.5 mm stereo mini jack.
2
HEADPHONES LEVEL control
Adjusts the level of audio output from the [
PHONES
] output
terminals.
3
MIC LEVEL control
Adjusts the level of audio input to the [
MIC
] input terminals.
Содержание DDJ-RR
Страница 17: ......
