47
CDJ-3000
5
6
7
8
5
6
7
8
A
B
C
D
E
F
6.2 JOG LCD CALIBRATION
-1, +2
-1, +2
!
The displacement between JOG LCD and LCD Sheet is corrected in this mode.
[Operators List]
1
[TRACK SEARCH
o
] button
[TRACK SEARCH
p
] button
2
[SEARCH
m
] button
[SEARCH
n
] button
3
[PLAY/PAUSE
f
], [CUE] button
4
[TEMPO RESET] button
: Move the black line by one pixel to the left.
: Move the black line by one pixel to the right.
: Move the black line 1 pixel upward.
: Move black line 1 pixel downward.
: Save by pressing its simultaneously.
: Calibration starts again by pressing it.
[Initial state]
All LEDs flash.
The following is displayed on the JOG display
+
If this mode has been performed in the past, it will be displayed in the state saved previously.
[Confirmation Procedure]
!
JOG display
(1) Press
4
[TEMPO RESET] button.
(2) Press buttons
1
and
2
to move the black line. Refer to [Operators List] for the direction of movement.
The movable range is up to 4 pixels in each direction from the initial state.
(3) Press
3
[PLAY/PAUSE
f
] and [CUE] buttons simultaneously, and save the result.
If the saving is completed, the LEDs of
1
,
2
and
3
buttons light off.
Press
4
[TEMPO RESET] button, Calibration starts again. (LEDs of
1
,
2
and
3
buttons light on again)
+
When restarting the Calibration, it starts from the last saved state. It is the same about the position of the black line of the JOG display.
[Warning display when Calibration does not start]
If Calibration does not perform, JOG ring flashes in VARIOUS INFORMATION mode.
Refer to "6.1 SERVICE MODE_VARIOUS INFORMATION [Mode 1/10]".
[Confirmation method in this mode]
If LCD Calibration does not perform: JOG ring flashes (MAX brightness
d
OFF
d
MAX brightness...)
If LCD Calibration performed: JOG ring lights off
The back screen color is white.
The moveable range is ±4.
The border line color is black.
!
Touch display
1
2
3
4
JOG display
JOG display
