Pintek DS-1010P, Инструкция по эксплуатации

Страница: 22 / 58

22
Specifications
All specification applies to 10X probe and All the DS-1010P Digital
Storage Oscilloscopes.
To verify that the oscilloscope meets specifications, the oscilloscope
must first meets the following conditions:
 The oscilloscope must have been operating continuously for thirty
minutes within the specified operating temperature.
 You must perform the Do Self Cal operation, accessible through the
Utility menu, if the operating temperature changes by more than 5
°
C.
 The oscilloscope must be within the factory calibration interval.
All specifications are guaranteed unless noted “typical.”
Inputs
Input Coupling AC,DC,GND
Input Impedance 1M Ω ±2% || 16Pf±3Pf,50 Ω +/-2%
Ch to Ch Isolation
(Both channels in same
V/div setting)
>100:1 at 50MHz
Maximum input Voltage
400V
（
DC+AC PK-PK
，
1M
Ω
input
impedance
，
X10
），
CAT I
Probe Attenuator 1X,10X
Probe Attenuator Factors
Set
1X,5X,10X,50X,100X,500X,1000X