Pintek DP-800HS, Инструкция по эксплуатации

Страница: 8 / 20

5
[N.B]
The real vertical deviation in V/div is equal to the attenuation
factor multiplied by the range of vertical deviation selected on
the oscilloscope. It will be doubled in the case of use of a 50
Ω
load.
Example:
With the probe on factor x 10, the oscilloscope on 1 V/div, the
real vertical deviation is 10 x 1 V/div = 10 V/div.
With a 50
Ω
load on the input of the oscilloscope the deviation
becomes: 10V/div x 2 = 20V/div.
X 100 Range
Real Deviation In V/div
1
X 10 Range
0.5 50V
0.2 20V
0.1 10V
50 m 5V
20 m 2V
10 m 1V
5 m 0.5V
2 m 0.2V
6. EXT. POWER SOURCE
!
Power consumption of the probe are 200 mA, thus it not suit for
battery, please use the accessory adapter only, please use
supplied adaptor 115V(SP-115) or 230V(SP-230).
!
If there are any damage on the adaptor, please contact us and
use the adaptor supply by us only. If the input power over 12V DC
will caused to the probe hard damage.
Vertical Deviation on the
Oscilloscope in V/div
100V
X 1 Range
5V
2V
1V
0.5V
0.2V
0.1V
50mV
20mV
10V
0.5V
0.2V
0.1V
50m
20m
10m
5m
2m
1V
DP-800HS Instruction Manual