Pintek DP-800HS, Инструкция по эксплуатации

Страница: 7 / 20

4
5. OPERATING PROCEDURE
!
Connect to BP-356N and BP-256N(or BP-276N) to DP-800HS
input and place BP-256N(BP-276N) on the circuit to be tested.
!
Connect BP-250 and DP-800HS output and connect to
oscilloscope.
!
Adjust the vertical zero adjustment of the oscilloscope if
necessary.
!
Select the attenuation ratio* and the vertical deviation of the
oscilloscope in accordance with the conversion table below.
!
NB: The POWER light must come on.
The conversion table gives the real vertical deviation.
MAX Voltage Input Range
(DC+AC Peak)
X 100
800Vp-p
80Vp-p
4. OPERATING ENVIRONMENTAL CONDITIONS
(1) Dimensions and Weight:
218 x 83 x 30 mm; 390g
(2) Electrical Safety to IEC 1010-1
!
Dual Insulation
!
Installation Category III
!
Degree of Pollution 2
!
Rated Voltage or Max Live-Earth: 400V RMS
(3) CE Mark
Conforms to EN 50081-1 and 50082-1 standards
Temperature
Relative Humidity
Reference Use Storage
+20
°
C … +30
°
C
70 % RH
0
°
C … +50
°
C
10 % … 85 % RH
-30
°
C … +70
°
C
10 % … 90 % RH
Attenuation
X 10
AC RMS
MAX Input
280Vrms
28Vrms
DCV
MAX Input
±
400V
±
40V
8Vp-p
X 1
2.8Vrms
±
4V
DP-800HS Instruction Manual