Note:
T
o prevent problems with this mount not holding
it’
s angle (sagging) make sure part B is tightened first
before tightening part C.
This diagram shows how the
parts fit each other
, but it is not necessary to remove
part B to mount the speaker
.
P
. 4/4
(D,K,L
& R)
DUAL
MOUNTING POINTS
F
,G or H
F
,G or H
J
J
D
L
K
R
SINGLE MOUNTING POINT
C,D,M or E
L
K
(C,D or E & K,L)
KEYHOLE MOUNTING POINT
E
L
K
I
or
L
E
K
I
or
(E,K,L,I)
(I,K,L,E)
2.67” (68mm) Max
1.96” (50mm) Min
T
o mount a speaker
, remove the single point
adapter tip(A) from the Mounting body(B) and
determine the correct speaker mounting point
your speaker has from the three (3) diagrams
shown in step 3.
-Some speakers may use more than one type
of mounting point, select the one best suited
for your application.
-The hardware kit supplied with this mount are
contains the most common size screws used
to mount speakers. Some speakers may
require longer or shorter screws not supplied
in this kit.
A
B
Once the speaker has been attached
to the adapter tip(A), replace the adapter
tip(A) to the mounting body(B) and then
attach the adapter body(B) to the speaker
mount assembly(C).
A
B
C
Step 2
Step 3
After the speaker has been attached
to the speaker mount assembly
, you
should connect the speaker wires.
T
o aim the speaker
, loosen the small
allen key bolts (C1) so that the adapter
body can be rotated & tilted to the
desired position.
T
ighten the allen key
bolts(C1) to lock the speaker into the
desired position.
C1
MOUNTING THE SPEAKER
Step 1
Before installing the speaker
, remove
the mounting tip assembly(1) from the
mounting bracket body(2).
1
2
Step 2
Step 4
Step 4
