Minimizer B4850WOA, Инструкция по монтажу

Страница: 1 / 5

Revised 04/01/2016 Page 1
B4850WOA
Fender Mounting Instructions for MIN4050, MIN950 & MIN1550 Fenders
STEP 1
A. Unpack all cartons and lay out parts.
B. Compare the parts with hardware kit B4850WOA as shown in Figure 1.
STEP 2
A. Measure the suspension travel. This measurement is used to determine the distance
between the fender and the wheel.
a. For air suspension systems, let the air out of the air bags.
b. For spring systems, measure from the stops on the springs to the bottom of the
frame.
NOTE:
For air suspensions with travel exceeding 6”:
In some cases a travel stop may need to be installed to prevent such large gaps
between the fenders & tires. This will help with alignment and 5
th
wheel plate clearance.
( Please call Minimizer @ 800-248-3855 for questions regarding this issue).
PART NUMBER DESCRIPTION QTY
PB5010 STEEL WELD-ON TAPERED BRACKET 2
I31C100BSF/RBZ 5/16-18 X 1 HEX WASHER HEAD BL 12
I31CNCF/RBZ 5/16-18 CLASS F FLANGE LOCK 12
I31N150WFEZ 5/16 X 1 1/2 FENDER WASHER 12
PB5067 STEEL ANGLE FOR PB5069 2
I62C250BFL8/RBZ 5/8-11 X 2 1/2 HEX FLG BOLT BZ 2
I62CNCG/RBZ 5/8-11 CLASS G FLANGE LOCK N 2
PB1/2"SPACER 1/2" POLY SPACER 2
PB5069 COMPOSITE CENTER BRACKET 2
I31C125BSF/RBZ 5/16-18 X 11/4 HEX WASH HEAD B 8
I31CNCF/RBZ 5/16-18 CLASS F FLANGE LOCK 8
PB5071 COMPOSITE ANGLE FOR PB5069 2
I31C125BSF/RBZ 5/16-18 X 11/4 HEX WASH HEAD B 14
I31CNCF/RBZ 5/16-18 CLASS G FLANGE LOCK 14
B4850WOA Mounting Kit
Figure 1