Troubleshooting Guide
Problem
Possible Cause
Corrective Action
Fan does not operate
1.
No power
Inspect Power Cord for damage. Be sure
unit is plugged in and turned on
.
2.
Bad switch
Replace Power Switch (Note: To prolong
life of Power Switch, it is recommended
that the fan is first operated in LOW for 5-
10 seconds before switching to HIGH).
3.
Bad motor
Replace Motor.
Reduced Air Flow
1.
Loose pulleys or fan blade
Tighten pulley Hex Screw.
2.
Loose or worn belt
See page 3 for belt tightening instructions.
3.
Motor is humming
Capacitor is damaged. Replace Capacitor.
Excess Noise (vibration,
slapping, squealing)
1.
Fan is not on level ground
Turn off fan, and relocate unit to smooth
level surface.
2.
Loose pulley or belt
Tighten Hex screw to tighten Pulley. See
page 3 for for belt tightening instructions.
3.
Motor bolts are not secure
Tighten Motor Safeguard bolts and 4 motor
bolts.
4.
Defective fan bearings
Replace Fan Bearings.
Pinnacle Products International, Inc.
reserves the right to make any changes in materials,
specifications, prices or design without notice.
Pinnacle Products International, Inc.
may also
discontinue items at any time.
Pinnacle Products International, Inc. Portable Air Circulator Owners’ Manual
Page 5
Specifications subject to change without notice
Capacitor Assembly
Fan Shaft Assembly
NEVER LEAVE A FAN
OPERATING UNATTENDED
Portable
Air Circulator