Cyclonic
Kit
Suitable for 1.5W x 1.5D x 2.0Hm Garden Shed
Tools required: Drill, measuring tape, phillips-head screw driver, rivet gun, rubber mallet, sturdy ladder, shifting spanner, 2 saw horses,
3mm steel drill bit, 4mm steel drill bit and a 10mm masonry drill bit.
Assembly instructions
1.5m Skillion Series
Congratulations
on purchasing your new Pinnacle Cyclonic Kit. Before assembling, we
recommend you read the instructions thoroughly. This Cyclonic kit need to be installed with a
specific Pinnacle shed. We recommend you assemble the shed using a trestle table or sawhorses
and planks. This will ensure that you are working off the ground and make it easier for you.
Assembly is a two-person job and should not be attempted in windy conditions.
