Run a channel SCAN after connecting and positioning antenna
TIPS:
- Always try your antenna with and without the amplifier attached.
Depending on how close/far away you are from your towers, the amplifier
can help or hurt your signal.
- Go to antennaweb.org and enter your street address. This will show you
where the broadcast towers near you are located.
- Move your antenna around to see where you can obtain the best signal.
Any time you move it, or adjust the gain on the amplifier, it is
recommended to run another channel scan.
FEATURES:
- Boost the reception of your digital TV antenna signal.
- Enhances the performance of passive antennas in remote areas where the
signal isn't strong.
- Preserves signal purity with Extremely Low Noise (ELN) circuitry.
- Turn a TV with spotty reception into one with crisp and clear signal.
6
Also Scan:
- Anytime antenna is moved
- Every month
- If you lose a channel
Scanning finds all available channels,
including newly added or changed.
General Instructions
1. Select MENU on the remote control that
came with your TV or digital converter box.
2. Select Channel Settings or Tuner Settings
3.Select Signal Source
4. Select Antenna or Air; not Cable
5. Select Channel Search or Channel Scan
Steps may vary. See your television’s manual.
