Assembling Octocam
This tutorial will guide you through how to assemble your OctoCam kit. Octocam is the cutest way to set
up a tiny motion-activated security camera, a baby monitor, or timelapse rig.
The on-board wireless LAN and Bluetooth on the Pi Zero W mean that it's possible to monitor your
OctoCam remotely, or have it send images or animated GIFs to Twitter periodically.
The guide will show you how to attach the camera to your Pi Zero W, assemble the OctoCam camera
mount, and how to attach the optional desk stand.
It should less than 30 minutes to assemble everything.
Preparing the OctoCam mount
You should have the following pieces:
red, etched acrylic OctoCam mount
clear acrylic desk stand
4x clear suckers
4x M2.5 white nylon bolts
8x M2.5 white nylon nuts
4x M2.5 white nylon spacers
small rubber foot
