Pima TD-600/SAT-6, Руководство по установке, Страница: 8 / 12

TD-600/SAT-6 Installation Guide
8
Programming the SAT-6
Because the SAT-6 is based on Captain 6 PCB, you can find the complete programming
instructions in the Captain 6 installation guide. Here we detailed several parameters which relate
to the radio transmitter of the TD-600.
The next diagram describes the CMS parameters menu and is followed by details.
Radio subscriber ID

enter the ‘Rad’ subscriber ID
The ID can have up to 4 digits. The largest allowed number on PIMA formats is 8000.
If the I.D. is set to zero, no subscriber number is programmed.
Central Monitoring Station format
enter radio station number (‘T’)

enter the
ACK waiting time (in sec. Min: 20, Max: 60) and the transmissions number per event 1

enter the Kissoff delay (in 250ms increments per numeral)

enter the number of frames per transmission (Min.: 1, Max.: 13, recommended: 10 - 13)

1 The delay between the transmissions is 10 sec. and is not programmable.

Technician code
Select:
CPTN XX en 6.10

Subscriber I.D
ENTER/NEXT/END

Subscriber I.D
Ph:0 Rad:0

DblRep. or Part.
Ph:0 Rad:0

Station Format:
0 0 <T=0

Ack Time(sec) 20
Radio Trans. 5

Kissoff Delay
0

Frames in Tr.
13

Auto test hour
0 :0

Auto test time
0 hr. 0 min

ENTR
ENTR ENTR ENTR
ENTR ENTR ENTR
ENTR ENTR
Subscriber I.D
Ph:0 Rad:0
Station Format:
0 0 <T=0
ENTR
Ack Time(sec) 20
Radio Trans. 5
ENTR
Kissoff Delay
0
ENTR
Frames in Tr.
13
ENTR