Programming the RC-U
20
Enabling and Setting Wireless Zones
1,2,3...
[
Master Code
→
NEXT
SERVICE
→
[
Service Code
→
7
HOME 2
→
ENTR
eight times until you see the following
display:
W 1 X M
W i r e l e s s
-
- - -
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A plus (“
+
”) should be set under the
W
. This indicates that a wireless
receiver (i.e., RC-PRO) is connected to the system
Under the
1
, set a plus (“
+
”) or a minus (“
-
“) as follows:
+
when all 16 zones are wireless
-
when 8 zones (1 to 8) are wired and 8 (9 to 16) are wireless
NOTE:
The parameters are set (i.e., changing from + to – and vise versa) is done by pressing
the
#
RESET
.
To move back and forth between parameters use the
BACK
and
NEXT
SERVICE
keys.
IMPORTANT!
When installing eight wired and eight wireless zones, the receiver should be
programmed with zones 1 through 8 while in the control panel these zones are
represented as zones 9 through 16 respectively (i.e., zone 1 in the receiver is zone 9 in
the control panel, zone 2 is zone 10 and so forth).
