Pilz PSSu E S 2AI RTD, Руководство по эксплуатации

Страница: 13 / 40

Function description
Operating Manual PSSu E S 2AI RTD(-T)
22017-EN-07
13
Schematic representation of signal processing:
INPUT ADC Filter
Range
monitoring
Data
format
ST
module
bus
Manufact.
scaling User
scaling
Lineari-
sation
4.3 Configuration
The following options exist for configuring the module in system environment A:
}
Via a fieldbus without the modular device description file
Without the modular device description file it is only possible to configure the input or
output range. All other configuration details have default values.
}
Via a fieldbus with the modular device description file
With a modular device description file it is possible to configure all the values.
}
Via the USB port of the head module, using the PSSuniversal Configurator
All the values can be configured using the PSSuniversal Assistant. Any configuration
via the USB port will overwrite the configuration made via the fieldbus.
If a module has been configured via the head module's USB port, it is locked and cannot be
overwritten by the fieldbus. This lock can be deactivated again in the PSSuniversal Config-
urator.
The following options exist for configuring the module in system environment B:
}
Via the head module's USB port with PAS4000.
4.3.1 Measuring ranges
The input measuring ranges may be configured per input:
}
Pt100 (Default)
}
Pt200
}
Pt500
}
Pt1000
}
Ni100
}
Ni120
}
Ni1000
}
0 ... 4000 Ohm (resistance measurement)
The temperature ranges for these measuring ranges can be found in the technical details.