Installation
Operating Manual PSS u2 B1, PSS u2 B4
1003626-EN-01
15
1. Insert the backplane on to the mounting
rail. Leave enough distance [X] to the left to
enable the head module to be installed. This
distance will depend on the width of the
head module.
The mounting rail interlock must be in the
open position, to the left.
2. Turn the mounting rail interlock to the
right to lock the backplane on to the mount-
ing rail.
X
5.4
Install protective plate
NOTICE
Damage due to electrostatic discharge!
Electrostatic discharge can damage components. Make sure that the yellow
cover plate is fitted at the end of the backplane block. The yellow cover
plate is an integral part of the head module.
