PSENop 3.3
Operating Manual PSENop 3.3
1003600-EN-02
7
2. Attach the reflector to the mounting surface using two screws (M4).
Display and operator elements
[2]
[3]
[1]
[1]
Control for setting the sens-
itivity
To detect smaller objects, set the control to a lower
sensitivity (move control to the left).
To detect larger objects, set the control to a higher
sensitivity (move control to the right).
[2]
Yellow LED: Status indicator LED on: Light beam is interrupted
LED off: Light beam is not interrupted
[3]
Green LED: Operating
status and luminosity
LED on: Light beam is detected, device is ready for
operation
LED off: Light beam is not detected (caused by con-
taminations, for example), device is not ready for oper-
ation
LED goes out briefly when an object enters the light
beam
