Pilz PSEN sl-0.5p 1.1, Руководство по эксплуатации

Страница: 24 / 35

PSEN sl-0.5p 1.1
Operating Manual PSEN sl-0.5p 1.1
21904-EN-10
24
Meaning of flash frequency:
Flash frequency Meaning
I 3 times, short Code for error message
II Once, for one second each Code for 1st digit
III 4 times, for one second each Code for 2nd digit
IV Once, for one second each Code for 3rd digit
V 3 times, short Code for error message repeated
Table of error codes
Error code
Decimal
Number of flashes Description Remedy
1,4,1 3x short – 1x long – 4x
long – 1x long – 3x short Wiring errors at
the inputs or out-
puts Check the wiring of the inputs
and outputs and rectify wiring
errors
1,12 3x short – 1x long – 12x
long – 3x short Wiring error out-
put 12 Check wiring output 12 and
rectify wiring error
1,6,3 3x short – 1x long –
6x long – 3x long –
3x short Wiring error out-
put 12 Check wiring output 12 and
rectify wiring error
1,13 3x short – 1x long – 12x
long – 3x short Wiring error out-
put 22 Check wiring output 22 and
rectify wiring error
1,6,4 3x short – 1x long –
6x long – 4x long –
3x short Wiring error out-
put 22 Check wiring output 22 and
rectify wiring error
14 3x short – 14x long – 3x
short Wiring error out-
put terminal 12 or
capacitive load is
too high (cable is
too long) Check wiring output 12 and
rectify wiring error
Check cable length and
shorten it, if necessary (see
max. cable length)
15 3x short – 15x long – 3x
short Wiring error out-
put terminal 22 or
capacitive load is
too high (cable is
too long) Check wiring output 22 and
rectify wiring error
Check cable length and
shorten it, if necessary (see
max. cable length)
Other flashing codes signal an internal error. Remedy: Change device.