Pilz PSEN cs4.2a, Руководство по эксплуатации

Страница: 23 / 44

PSEN cs4.2a
Operating Manual PSEN cs4.2a
1003575-EN-08
| 23
}
Make sure that the safety switch and actuator cannot be used as an end stop.
}
Please note the installation measures in accordance with EN ISO 14119 for a safety
switch design 4 and with level of coding High.
}
Please note the permitted bending radii for the cable (see Technical details [ 33] ), to
avoid excessive force on the individual strands.
} Make sure that the bend protection is not damaged. Such damage can cause the whole
product to fail.
}
For simpler installation, the mounting brackets (see Order reference for
Accessories [ 42] ) can be used.
Safety switch
}
Safety switches should only be secured using M4 screws with a flat head (e.g. M4
cheese-head or pan head screws).
Procedure:
1. Provide the mounting surface with two drill holes for fastening the safety switch (see Di-
mensions in mm [ 30] ).
2. Use two screws to fix the safety switch in place. Do not fully tighten the 2nd screw on
the safety switch.