Overview Communication options
Operating Manual Communication interfaces
1002971EN03
9
2.2
Communication via the communication modules
When communication takes place via a communication module, data exchange is defined
via a Pilzspecific protocol. This protocol is described in more detail in the chapter entitled
.
The following device combinations are possible:
Communication Module
Base units
PNOZ m B0
INFORMATION
If virtual inputs/outputs are to be downloaded via the communication module
(without using a fieldbus module), the interface "Inputs/outputs that are
downloaded via the integrated interface" must be configured in the hard
ware configuration in the PNOZmulti Configurator.