Commissioning
Operating Manual PMD s10
22092-EN-05
| 21
INFORMATION
If you operate the unit without a chip card, the "Fault" LED will light and the
following message will appear once only:
Insert SIM Card
. If you change
the parameters, the
Insert SIM Card
message will reappear.
When the chip card is inside the unit,
}
the chip card is checked to verify the device identifier and ensure that the data is
identical.
}
Unit parameters are automatically saved to the chip card during operation. As a result,
the chip card always contains a copy of the unit's current internal data. Exception: If you
select
Write SIM? no
.
7.5.3.1
Insert chip card
NOTICE
The chip card contact is only guaranteed if the contact surface is clean and
undamaged. For this reason please protect the chip card's contact surface
from
– Contamination
– Contact
– Mechanical impact, such as scratches.
NOTICE
Switch off the product before inserting or exchanging the chip card.
Make sure that you do not bend the chip card as you insert it into the chip card slot.
