Pilz PITestop, Руководство по эксплуатации

Страница: 8 / 21

PITestop
Operating Manual PITestop
21136-EN-11
8
– PIT esb1.2 (1 N/C / N/O contact*, 1 N/C contact)
– PIT esb1.3 (1 N/C / N/O contact*, 1 N/C contact, 1 N/O contact)
– PIT esb1.4 (1 N/C / N/O contact*, 1 N/O contact)
}
PIT es safe contact block for surface mount version
– PIT esb2.1 (1 N/C contact)
– PIT esb2.2 (2 N/C contact)
– PIT esb2.3 (2 N/C contacts, 1 N/O contact)
– PIT esb2.4 (1 N/C contacts, 1 N/O contact)
* safe contact block, see Connection diagrams [ 12]
Pre-assembled E-STOP sets:
}
PIT es Set3.1:
– E-STOP actuator PIT es3.11
– Contact block set PIT esb1.2
}
PIT es Set3.2:
– E-STOP actuator PIT es3.11
– Contact block set PIT esb1.2
}
PIT es Set4.1:
– E-STOP actuator PIT es3.11
– E-STOP box PIT es box
– Contact block set PIT esb1.2
}
PIT es Set4.2:
– E-STOP actuator PIT es3.11
– E-STOP box PIT es box
– Contact block set PIT esb 2.3
Installation
CAUTION!
The pushbutton should always be installed with the supply voltage switched
off.
Panel mount version
}
Insert the actuator into an opening in the panel (see Opening in the panel in the panel
mount version [ 10] )
}
Use the plastic nut to secure it (24 mm spanner)
}
only with illuminated actuators:
– Attach "illuminating contact block" to the contact block bracket
– Feed the cable through an opening in the panel (see Opening in the panel in the
panel mount version [ 10] ) and attach to the actuator