PIT gb
Operating Manual PIT gb
1004627-EN-02
6
INFORMATION
This gives advice on applications and provides information on special fea-
tures.
Overview
Unit features
}
Slimline design
}
Housing with 12-pin M12 male connector
}
Control elements can be replaced with a new control element with the same design in
the event of repair
}
Labelling option for individual marking of the control elements
}
Control elements finally wired and installed
}
Can be installed in 16 different directions (see
Assembly positions [
12]
)
}
Coloured caps for marking the function of the control elements (see
Order reference:
Accessories [
25]
)
Scope of supply
}
PIT gb
}
2 washers M5
}
Coloured caps (set), sorted by colour
Safety
Intended use
The unit PIT gb is intended for use in safety circuits in accordance with IEC/EN 60947-5-5,
EN ISO 13850. Before using the device, a safety assessment of the overall system must be
performed in accordance with the Machinery Directive.
The PIT gb must be used in combination with a suitable evaluation device (see Connection
to evaluation device).
The following is deemed improper use in particular:
}
Any component, technical or electrical modification to the product
}
Use of the product outside the areas described in this manual
}
Use of the product outside the technical details (see chapter entitled "
Technical
details [
21]
").
Foreseeable misuse
}
Use of the PIT gb under corrosive environmental conditions (cooling emulsions, surface
treatment, gases, …)
Please contact Pilz.
