42
Each error code is indicated by three short flashes of the "Input" or "Safety Gate" LED.
After a longer pause, the LED will then flash at one second intervals. The number of LED
flashes corresponds to a digit in the error code. The error code can consist of up to 3 digits.
The digits are separated by a longer period without flashing. The entire sequence is con-
stantly repeated.
Number of flashes
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Decimal error code
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Example:
Error code 1,4,1:
Flash frequency of the "Safety Gate" or "Input" LED
I
IV
III
II
V
Meaning of flash frequency:
Flash frequency
Meaning
I
3 times, short
Code for error message
II
Once, for one second each
Code for 1st digit
III 4 times, for one second each
Code for 2nd digit
IV Once, for one second each
Code for 3rd digit
V
3 times, short
Code for error message repeated
Table of error codes
Error code
Decimal
Number of flashes
Description
Remedy
1.4.1
3x short – 1x long – 4x
long – 1x long – 3x short
Wiring error
Rectify wiring error
1.12
3x short – 1x long – 12x
long – 3x short
Wiring error
Rectify wiring error
1.13
3x short – 1x long – 12x
long – 3x short
Wiring error
Rectify wiring error
14
3x short – 14x long – 3x
short
Wiring error
Rectify wiring error
15
3x short – 15x long – 3x
short
Wiring error
Rectify wiring error
Other flashing codes signal an internal error. Remedy: Change device.
PSEN cs2.13p ATEX
Operating Manual PSEN cs2.13p ATEX
21133-2EN-1
