Pilz 503220, Руководство по эксплуатации

Страница: 5 / 20

PSEN 2.2p-20
Operating Manual PSEN 2.2p-20
20915-EN-08
5
INFORMATION
This gives advice on applications and provides information on special fea-
tures.
Safety
Intended use
The safety function of the safety switch is:
}
Safe detection of the magnetic actuator within the response range
The safety switch meets the requirements in accordance with:
}
EN 60947-5-3: PDDB only in connection
– with the actuator PSEN 2.2-20,
– the interface PSEN i1 and
– the approved evaluation devices.
The safety switch is designed for applications in series connections and it must only be op-
erated with the following components:
}
Actuator PSEN 2.2-20,
}
Interface PSEN i1 (see Order reference [ 19] ) and
}
a suitable evaluation device (see Requirements and connection to evaluation
devices [ 10] ).
The following is deemed improper use in particular:
} Any component, technical or electrical modification to the product
} Use of the product outside the areas described in this manual
} Use of the product outside the technical details (see Technical details [ 15] ).
NOTICE
EMC-compliant electrical installation
The product is designed for use in an industrial environment. The product
may cause interference if installed in other environments. If installed in other
environments, measures should be taken to comply with the applicable
standards and directives for the respective installation site with regard to in-
terference.