Safety
Operating Manual PSSu E S 2DOR 10(-T)
22047-EN-05
10
3
Safety
3.1
Intended use
The module provides type 1 relay ouputs in accordance with IEC 61131-2. It may be used
to switch:
}
Resistive loads
}
Inductive loads
The module may be used for standard applications in system environment A.
The module PSSu E S 2DOR 10-T is suitable for use where there are increased environ-
mental requirements (see Technical Details).
Intended use includes making the electrical installation EMC-compliant. Please refer to the
guidelines stated in the "PSSuniversal Installation Manual". The module is designed for use
in an industrial environment. It is not suitable for use in a domestic environment, as this can
lead to interference.
The following is deemed improper use in particular:
}
Any component, technical or electrical modification to the module
}
Use of the module outside the areas described in this manual
}
Any use of the module that is not in accordance with the technical details.
INFORMATION
The module is supported by:
}
PSSuniversal Configurator and PSSuniversal Assistant from Version
1.6.0
}
PAS4000 from version 1.7.0
– We recommend that you always use the latest version (download
from www.pilz.de).
The PSSu E S 2DOR 10 module may be used in conjunction with the following base mod-
ules:
}
PSSu BP 2/16 S
}
PSSu BP 2/16 C
}
PSSu BP-C 2/16 S
}
PSSu BP-C 2/16 C
The module PSSu E S 2DOR 10-T may be used in conjunction with the following base
modules:
}
PSSu BP 2/16 S-T
}
PSSu BP 2/16 C-T
}
PSSu BP-C 2/16 S-T
}
PSSu BP-C 2/16 C-T
